Table of Content
The winter work gloves are constructed with a waterproof and windproof layer to help users stay dry while working in cold, wet, and snowy conditions. The cold weather work gloves are designed to stay warm with 40 g of insulation. Reinforced palms and fingertips ensure the gloves survive after heavy jobsite use. The gloves also have an integrated protective knuckle guard providing extra protection to the user's hands. The SMARTSWIPE Knuckle allows users to use touch screens without removing their gloves or having to wipe dirty fingertips across the screen. The Milwaukee Winter Performance Gloves are designed to provide users with All Day Warmth.
The fingerless design provides ultimate dexterity when handling small objects and the hook and loop closure ensures a secure fit. Milwaukee Demolition Work Gloves are designed to provide Ultimate Durability and All Day Comfort. Featuring palms and finger tips reinforced with Armortex, Milwaukee Demolition Work Gloves will provide best in class durability and grip for the most demanding tasks. The integrated Smart swipe Knuckle is designed to allow the use of smart phones and touch screens, without removing gloves or wiping dirty finger tips across the screen. In addition, a breathable lining and built-in terry cloth sweat wipe ensure the gloves remain comfortable all day. The Milwaukee Medium Impact Demolition Gloves are designed with users in mind equipped with Impact Protection and Reinforced Durability.
Cut Rating
Unlike the ANSI/ISEA 138 standard that test the full back of hand this only test the knuckle location. EN 511 is the European test standard for evaluating protection from low temperatures. The standard applies to all gloves that provide hand protection from the cold down to -50 degrees Celsius. The test measures how well the glove can withstand convective cold, contact cold and water permeation. Milwaukee® Cut Rated Winter Insulated Gloves are EN511 rated to keep users protected even in cold environments. Tear - A materials tearing strength is tested by measuring the force material required to tear the sample apart.
Impact Protection – Unlike the other mechanical risk test impact protection for EN 388 is a pass/fail. It is test by cutting open the glove, lying it flat and placing it on top of a sensor. The glove is struck with 2.5kgs of force at a distance that provides 5J of impact energy. If the average force transmitted is less than or equal to 7kN and no single result is greater than 9kN it receives a pass rating or “P”.
Personal Protective Equipment
The durable work gloves feature impact rated enhanced TPR on the back of the hand and fingers to help prevent against back of hand injuries. The demolition gloves meet the ANSI/ISEA 138 Level 2 protection standard. The glove palms and fingertips are reinforced with ARMORTEX for added durability.
Tested using a rotating blade with a fixed load to determine a cut rating between 1-5. If the blade makes 60 passes without cutting the material than it moves to the ISO or TDM test. The Coup Test can sometime fail with a highly cut resistant material because it dulls the blade and does not produce results.
EN511 - Protection From The Cold
Milwaukee® offers cut level 2, 3 and 4 Polyurethane Dipped Gloves that provide better fit and better protection. Foam NitrileFoam nitrile coating absorbs excess liquid from surfaces to keep gloves dry and provides a better grip. The coating offers a lighter feel and better dexterity compared to traditional nitrile. The same TDM-100 used in the ANSI/ISEA 105 test is used here when results are not possible in a coupe test.
Milwaukee® gloves prioritize high dexterity and comfort in their materials to help users perform on the jobsite and are offered in various knits ranging from 13 to 18-gauge. The gauge of a glove refers to the number of stitches per inch of knit material. A lower gauge uses thicker yarn and creates a looser knit whereas a higher gauge uses thinner yarn that provides a tighter knit. However, the type of yarn, dipped materials, and dip coverage all factor into the final fit and comfort of the glove.
In 2018 the Bureau of Labor Statistics reported 63,830 injuries from cuts, lacerations or punctures and found that the median days away from work from a hand injury was 6. ANSI/ISEA 105 is the American National Standard for hand protection classifications that regulates how gloves are tested and rated for different levels of cut resistance. Updated in 2016 from 1-5 to A1-A9 the higher number indicates greater cut resistance or more technically that it can withstand more grams of force.
A rating of 4 denotes a higher level of tear protection compared to a 1. Mechanical risks are tested in both the ANSI/ISEA 105 standard and the EN 388 standard. Nitrile is a multi-purpose dipped material that provides superior puncture and tear resistance as well as better durability. Nitrile offers good grip for oily and wet conditions and can perform in a wider range of temperatures than Polyurethane.
These heavy-duty leather work gloves are equipped with a pull tab for easy on and off. EN 388 is the European standard for hand protection and includes cut resistance, abrasion resistance, tear strength, puncture resistance and impact protection. All MILWAUKEE® impact resistant gloves ANSI/ISEA 138 impact rated and feature impact rated enhanced TPR to help prevent back of hand injuries. We also offer choices of material and cut protection so you can be comfortable and stay safe on the jobsite.
Milwaukee Performance Work Gloves are designed to provide Ultimate Durability and All Day Comfort. A reinforced thumb seam provides enhanced durability and the hook and loop closure ensures a secure fit. In addition, a breathable lining and built-in terry cloth sweat wipe ensure the gloves remain comfortable enough to wear all day. Milwaukee® Performance Work Gloves are designed to provide Ultimate Durability and All Day Comfort. Milwaukee Performance Work Gloves are Designed to provide Ultimate Durability and All Day Comfort. The Milwaukee Winter Demolition Gloves are designed to deliver users with All Day Warmth.
The palm padded work gloves deliver users added comfort by dampening vibration when material handling or upon impact. The Milwaukee XL Impact Demolition Gloves are designed with users in mind equipped with Impact Protection and Reinforced Durability. The Milwaukee XXL Impact Demolition Gloves are designed with users in mind equipped with Impact Protection and Reinforced Durability. MILWAUKEE® has created durable and reliable work gloves to keep you comfortable while still providing the protection you need.
The winter work gloves are constructed with a waterproof and windproof layer to help users stay dry during the winter. The cold weather work gloves are designed to stay warm with 60 g of insulation. A durable reinforced layer between the thumb and index finger provides users with enhanced durability in high wear areas. The Winter work gloves are constructed with a waterproof and windproof layer to help users stay dry while working in cold, wet and snowy conditions. The cold weather work gloves are designed to stay warm with 40g of insulation. Milwaukee FreeFlex Work Gloves are designed to provide Ultimate Durability and All Day Comfort.
A reinforced thumb seam provides enhanced durability and the FreeFlex elastic cuff ensures the gloves remain comfortable enough to wear all day. The Winter work gloves are constructed with a waterproof and windproof layer to help users stay dry during the Winter. Milwaukee Performance Fingerless Work Gloves are designed to provide Ultimate Durability and All Day Comfort. Featuring reinforced and padded palms for increased durability and cushioning, Milwaukee Work Gloves will provide best in class durability for the most demanding tasks.
No comments:
Post a Comment